Automatic Power Control Products and Panels

Our clients can avail from us, a wide range of automatic power factor correction panels that is used for actualizing zero voltage switching of capacitors. Designed to eliminate switching transients, these automatic power factor correction panels help in calculating load power factor by sensing the load current. Keeping in mind the specific requirements of our clients, we offer these panels in various customized sizes and specifications.

Our range of automatic power factor correction panels includes power factor correction controllers, welding power factor panels and harmonic control panels.

6 Benefits are described here:

• Reduce electricity bill
• Reduce power losses
• Reduce cable size
• Comply with power harmonic emission limits requested by Utilities
• Improve process quality
• Improve business performance
• Reduce electricity bill: Low power factor and power harmonics are resulting in increased power demand and reactive energy consumption. Both aspects are part of the electricity bill paid to the Electricity Utility that could be reduced by Power Factor Correction and Power Harmonic mitigation.
• Reduce power losses: By reducing the line currents necessary for transmission of a given active power to the loads, Power Factor Correction and Power Harmonic mitigation are reducing the power losses in the circuits.
• Reduce cable size: The cable size is determined according to the current requirements. In the following table is given the multiplying factor to be applied to the cable cross section which could result from a poor Power Factor

How Power Factor and Harmonic control panel relate to Energy Efficiency?

In an AC distribution system, the maximum active power is transmitted to a load when voltage and current are undistorted and in phase.

Available with us, is a wide range of AMF panels that is widely appreciated by our clients for optimum quality and efficient performance. Manufactured using superior quality material, these AMF panels are widely used in industries for managing DG sets. To suit the specific requirements of our clients, we offer these precision engineered AMF panels are available in various sizes and specifications.

Ou range of AMF panel includes automatic changeover with current limit, battery charger, power invertors, automatic changeover and sine wave inverters.

We are specialized in offering synchronized AMF panels, which are widely appreciated by our clients for corrosion resistance and easy operations. Manufactured using superior quality material, these synchronized AMF panels are extensively used for automatic changeover from mains to stand-by generator at the time of power failure. Designed in compliance with the international standards of quality, these synchronized AMF panels are ideal for places where the generators are installed between main AC and load.

These synchronized AMF panels find wide application in the following areas:

• Foundries
• Apartments
• Textile industry
• Sugar industry
• Chemical industry

The highlighting features of our synchronized AMF panels are mentioned below:

• Load Manager, Power reverse protection Earth foult, filed lost control, auto manual synchronisation, dual volt meter, dual frequnce meter, all comes in a single panels.
• Automatic start and stop of the generator and changeover the EB/generator lines
• Auto/manual selector is available
• Auto delay in start of genset
• Genset stop with delay of 3 minutes
• Hooter-alarm annunciation for fail to start
• Checklist to find the fault and to correct
• 4ST switch control for healthy start and stop of genset
• Manual start & stop switch
• Available with emergency stop switch
• Auto LLOP (Low Lube Oil Pressure) and (High Water Temperature) protections are available (LLOP & HWT Sensors-Relays are not part of this panel
• Provided with control wires and safety sensors according to their generators’ standard
• All comes in a 14 /16 SWG Panel with door

We manufacture fully automatic SCR battery chargers. These areavailable in float and boost or float-cum-boost, constant voltage, constant current & constant potential, thyristor controlled, upto 100kw rating for lead acid,. The SMF or Ni-cd batteries range from 20AH to 5000 AH and 12V, 24V, 48V, 110V and 220V or any custom range.

Features:

• Fully Automatic SCR Controlled battery charger.
• Auto boosting , Auto over volt cut off
• Auto current limit control
• DC volt meter , Ammeter
• Trigger boost cum changer
• And as per customer specification

Features:

• Fully Automatic SCR Controlled battery charger.
• Auto boosting , Auto over volt cut off
• Auto current limit control
• DC volt meter , Ammeter
• Trigger boost cum changer
• And as per customer specification

The ACCL also known as automatic changeover with current limit, allows unrestricted supply from mains. When the main supply fails and stand by Generator supply is on. It connects the DG power to each consumer in sequence & starts monitoring itsload. The generator current allotment is software calibrated & sealed in each ACCL as per buyer's specification & is available on all load circuits.

When ever the load current exceeds the allotment, power is automatically switched off for 8/10/12 seconds, and then automatically restored. Total automation at no extra cost over outdated manualsystem.

• No restriction on choice of generator power points.
• No separate wiring required.
• Assured availability of allotted current no less, no more.
• Significant saving on wall space & wiring.
• Simplifies electrical complexity.
• Safeguards generator by gradual loading & precisionmonitoring.
• LED indication of all operational states.
• Fully solid state, using imported precision components.
• Wide range of Single & Three Phase models

• Micro-processer based.
• 2 – 10 seconds delayed mains transfer for added safety.
• Gives TRIP LED Indication.
• DOUBLE RELIABILITY.·      
• No chance of WATER INGRESS. NEATER PANEL WIRING.
• Single phase ACCL comes in TP MCB Size (54mm)Inbuilt 20ms response HIGH LINE-VOLTAGE INTERRUPTER to protect your Electronic Appliances during Neutral Failure.

We are specialized in offering a wide range of industrial servo voltage stabilizer that are designed as per the specifications and requirements of our clients. We do wide ranges, even from 100v, 140v, or as per the customers requirement. We provide many types of servo controlled, line interactive and automated voltage regulators, stabilizers and voltage selectors.

Manufactured using guaranteed  switchgear components, these panels ensure minimum leakage and trouble free operations. These industrial servo voltage stabilizers help in maintaining constant output voltage for various industry applications.

Available with us, is a wide range of low tension panels that is designed in compliance with the international standards of quality. Being easy to install and precision engineered, these panels are widely demanded in electrical and engineering industry. Keeping in mind the specific requirements of our clients, we offer these low tension panels in standards as well as various customized specifications. We do, main voltage panels, distribution panels, SDB, MSB,DB, metering panels and all type of panels with variant features, automations etc.

We manufacture and export industrial energy savers. Quantum of energy savings depends on a number of parameters like input voltage, the type, rating and make of lamps, lamp burning hours etc. However, the minimum saving percentage will never be less than 15. Generally, observed savings will typically be in the range of 22 - 27%. In ideal cases this figure goes up to as high as 36%. Therefore, while we normally offer a `money-back'' guarantee of 15% savings, one may reasonably expect to get around 25% or better.

Another significant energy saving equipment is achieved by way of life-extension of lamps. A fall out of this is also substantially reduced maintenance and lamp replacement expenses. Typically, an additional amount of between 25 - 50% of the cost of the VOLT-ON could be saved annually on this count alone. 

We are specialized in offering a wide range of RYB phase sequence correctors that is designed and constructed to meet the demands of sensitive three phase equipment. Manufactured using superior quality material, these correctors prevent damages at the time when phase is changed or reversed. These safe to use panels can auto reset, and are ideal for single phasing and voltage imbalance. Our RYB phase sequence correctors are installed at three phase UPS, three phase air conditioners & sensitive and Three Phase equipment.

Our RYB phase sequence correctors are used in the following areas:

• Banks
• Big
• Showrooms
• Indian Oil Corporation

• Models & Amps/ KVA Rates: 30 Amps, 40A, 60A, 100A, 125A, 150A, 200A, 250A, 300A, 400A, 450A, up to 630 Amps

The key features of our RYB phase sequence correctors are as under:

• Suitable for correcting the RYB phase sequence, whenever the sequence is changed or reversed
• For Three Phase UPS, during sequence changed or reversed, UPS will start use the battery power & battery may become empty within half or one hour
• 3Ph air conditioner will be tripped off, due to sequence reversal & the entire office will be suffering or disturbed because of AC failure
• Avoid damages during phase sequence changes or reversal
• The sequence corrector will switch off, during the single phasing or imbalance voltage occur & later, auto-reset after restoration
• No break downs of Lifts, UPS, Machineries,, 3 Ph. Air conditioner or any motors or 3-phase system due to any change in sequence
• Certified by ETDC (Electronic Test & Development Center) Govt. of India

We manufacture and provide our clients with sne wave inverters.

Features:

• Intelligent auto reset.
• Over voltage protection.
• Battery cell fault indication.
• Liquid crystal display.
• Load level indication.
• Single feather touch operations.
• Highly stable, crystal controller frequency.
• Intelligent battery management.
• Overload early warning.
• Pure sine wave.
• Over load, short circuit, lighting and battery over drain protection.
• Low voltage charging.
• Charger status indicator.
• Battery low early warning.
• LED & AUTO indicator for all status.
• Delayed change over to mains for disturbance free operation. 

The Indicator Panel:

The indicator panel on the front of the inverter tells you how the inverter is functioning. There are five different LED s on the panel as show . These LEDs change colour and show different colours for different status of the inverter.

Our industrial transformers are very compact in sizes and hence suitable for basement installations in high rise buildings etc. Iron core dry type industrial transformers are available with low losses giving savings over long service periods.

Features:

• Power  Transformers
• Isolation Transformers
• Step up Transformers
• Step down Transformers
• AC DC Transformers
• Constant current Transformers
• And as per customers Required

• Digital Clock based street light Control system: One may set the On time and off time. The switching of street lights shall be repeated every day. Another option may be designed for switching ON/ OFF the alternate lights at designated time to save energy without compromising the requirements.
• Sun rise / Sun set based Street light Control System :
• Light / Lux based control for switching the street lights: Light sensor is used for switching the lights. It is very important.
• Street light control with Dimming for energy saving : The idea behind the control strategy is that during the late night till morning the traffic is low and hence it is possible to reduce the lux levels. The dimming makes the lights uniform throughout the street and saves valuable energy. The saving may range from 20% to 35% depending on the control strategy and choice of lamps / fittings. 

We offer dimmable ballast based FTL (fluorescent tube) lights. The ballasts can dim the lights from 100% to 10% of power level. Dimming may be automated with digital timer based controls.

Building maintenance systems were control the entire motors, power distribution & main switch etc. At one place through one BMS Panel to control the entire  management off up building the new factories or building site.

We are specialized in offering AC/DC drive control panels that are manufactured using superior quality raw material such as steel, aluminum, alloy, metal and brass. Being easy to install and sturdy in construction, these panels are widely used to control the sensitive motor operations and machines, pumping operations and process control applications. Our AC/DC drive control panels are available in models & Amps/ KVA rates of one Amp to any required Amps.

These Ac/DC drive control panels find wide application in the following areas:

• Textile industry
• Sugar industry
• Paper industry
• Food industry
• Chemical industry
• Cement industry
• Contractors
• Builders
• Flat promoters

Our range of automatic phase changers is widely appreciated by our clients for superior quality and optimum performance. The automatic phase changers & changeover offered by us automatically makes use of available phase lines, during the phase failure. It also cuts-off low voltage line in milliseconds and changes it to the next line. It is mainly installed at residences and small offices, where single phase equipment is used. These are available in two models i.e. auto switch-off and phase changer with distribution board.

Our automatic phase changers are reckoned for the following distinguishing features:

• Automatically changes the available phase lines to the non-available phase lines
• Certified by CETL- Govt. of Tamil Nadu
• Restore to the actual lines when the failure lines are restored
• Cut off at low voltage and changes to the next lines; changes in milliseconds
• Phase changer cum changeover model with auto switch off the generator (VTSL
• Model)
• Phase changer with distribution board models also available
• Models & Amps/ KVA Rates: 30 Amps, 40A, 60A, 120A, 180A, 300Amps.

Our automatic phase changers are used by the following:

• Building promoters
• Builders
• Electrical contractors
• Residential spaces

We offer our clients with a wide range of automatic control panels that is designed at par with the specific requirements of our clients. These automatic control panels are compact in design and precision engineered panels are widely used for instant switch over in various industrial applications. Available at highly competitive prices, these automatic control panels are widely demanded in the market.

Our range of automatic control panels includes electric control panels, industrial automation panels, line interactive voltage control panels,
sub-immersible control panels, soft start sequence control panels, neutral failure circuit breakers, ryb phase sequence corrector and automatic phase changers.

We are of the leading manufacturers an d exporters of a wide range of Generators that is made in accordance to client's requirements. Designed with precision using quality components and equipment, our flawless range of Generators is appreciated for its sturdy construction, optimum quality high performance and long working life. These are available in various specifications at most affordable prices.